Step-by-Step
Fast-Install Guide
Product Specification
- Specification
- Long
- Type
- Texture
- 150mm x 25mm
- 2200mm; 2900mm; 3600mm
- Solid, round holes
- Six Kinds
Charcoal
Walnut
Beige
Gold teak
Light grey
Antique
System Overview
Decking Boards
Exclusive Joist
Exclusive Intermediate Clip
Expansion Screw
Starter Clip
Clip Driver
Sample Box
Pre-Drill Holes
1. Mark the hole position on the ground according to the reserved holes on the joist.
2. Punch holes in the ground using an impact drill.
3. Insert plastic expansion pipes into the holes.
Install the Joists
1. Fix the starter clip to the end of the joist.
2. Secure the joist to the ground with screws.
3. Install all joists securely to the ground.
Install the Decking Boards
1. Push the first decking board firmly into the starter clips to ensure a snug fit.
2. Place fast-install clips into the joist. Rotate 90 degrees and then slide into the groove of the board.
3. Repeat this process for the second and subsequent boards.
Install the End Covers
1. Secure the last decking board to the joists.
2. Cut two end covers at a 45-degree angle for a seamless joint.
3. Drive screws into the end covers at 500mm intervals to securely attach them to the boards.
